Description
El sintering furnace and vacuum debinding is mainly suitable for the sintering process and deagglomerated alloyed tungsten heavy alloy, molybdenum alloy, titanium alloy and cemented carbide materials. The debinding and sintering furnace vacuum is used to PEG, rubber binder removal and paraffin. You can also perform sintering in vacuum, partial pressure and sintered processes lower pressure sintering.
Technical characteristics
1. The special design of muffle deagglomerated is adopted with a good seal and a complete removal of the binder.
2. It has the functions of vacuum, pre vacuum sintering, debinding lower negative pressure, deagglomerated TOWAC and deagglomerated under pressure positiva.
3. The furnace adopts the structure and advanced refractory materials, which are characterized by a good insulating performance and low thermal absorption. You can save more than 20% energy compared with the previous diseño.
4. The vacuum oven and deagglomerated sintering operation works using the touch screen and PLC (Programmable Logic Control), whose operation is simple and confiable.
5. The sintering furnace and vacuum debinding uses special zone thermal structure and thermal design element, ensuring good uniformity of temperatura.
6.El oven has the functions of fault alarm excessive temperature and pressure, and protection interligación automatic mechanical pressure, forming a highly secure oven.
7. It features remote operation, remote diagnosis of malfunctions and remote update features programas.
Optional configurations and Debinding Sintering Furnace Vacuum
1. Oven door: rotary type hinge manual lock / automatic lock necklace bloqueo.
2. Furnace vessel: All carbon steel / stainless steel inner layer / All Steel inoxidable
3. Thermal zone oven + soft carbon felt Felt hard compound / all felt hard compound.
4. thermal material: isostatic pressure / high pressure purity, density and strength graphite altas.
5. Muffle material: graphite fino.
6 size. Process gas control: volume flow meter / mass, manual / automatic valve, foreign brand / brand china.
7. Vacuum pump and gauge: Foreign Brand / Mark china.
8. Truckload: roller / horquillas.
9 type type. Operation Panel: Screen simulation / touch / industrial.
10 computer screen. PLC (Programmable Logic Control): OMRON / Siemens
11. Temperature controller: Shimaden / EUROTHERM
12. Thermocouple: Type C (tungsten coating / molybdenum coating / ceramic coating)
13. Recorder: No paper / paper, foreign brand / brand china
14. Electrical components: CHINT / Schneider / Siemens
Specifications Vacuum Sintering and Debinding
| Specifications Model | TMDS-020230 | TMDS-030306 | TMDS-040408 | TMDS-050513 |
| Size thermal effective area A × A × L (mm) | 200 × 200 × 300 | 300 × 300 × 600 | 400 × 400 × 800 | 500 × 500 × 1300 |
| Max. Weight (kg) (does not mean the actual weight of load) | 30 | 150 | 250 | 5 o'clock |
| Maximum temperature (° C) | 1550 | 1550 | 1550 | 1550 |
| Homogeneity of temperature (° C) | ± 3 | ± 3 | ± 3 | ± 5 |
| Thermal power (kW) | Four. Five | 75 | 90 | 210 |
| Ultimate vacuum (Pa) | 1 | 1 | 1 | 1 |
| Rate of increase in pressure (Pa / h) | ≤0.67 | ≤0.67 | ≤0.67 | ≤0.67 |
| Gas debinding | Ar / NAr / N2/ H2 | Ar / NAr / N2/ H2 | Ar / NAr / N2/ H2 | Ar / NAr / N2/ H2 |
| The above parameters can be adjusted to the process requirements, they are not standard acceptance, so the specific details should be established in the proposals and technical agreements. |
