Pusher type furnace

Description
El pusher type furnace is suitable mainly for reducing metal powder (such as tungsten, molybdenum, etc.) and sintering metallurgy parts polvo.

Technical characteristics
1. The multiple tube heat ensure uniform temperature and a large capacity producción..
2. Intermittent loading and discharge type ensure good sealing performance and low gas consumption.
3. Pushers ovens are configured with fully automatic charger boat pusher boat, unloading and discharge service boat, ensuring stable quality and lower labor.
4 force. The oven has operating functions to remote control, remote diagnostics and remote malfunction update functions programa.

Optional configuration Pusher Type Furnace
1. refractory material: aluminum silicate fiber / alumina ceramic fiber / high alúmina
2 brick. Thermal Material: 0Cr21Al6Nb, 0Cr27Al7Mo2
3. Muffle Material: SUS304 / SUS310S / RA330 / RA600 / ZG45Cr28Ni48W5Si2
4. Pusher type: pneumatic / hydraulic / mecánico
5. Loading and unloading: loading and automatic / manual loading and unloading pusher boat with automático.
6 download. PLC (Programmable Logic Control): OMRON / Siemens
7. Temperature controller: Shimaden / EUROTHERM
8. Thermocouple: Type C / Type S / Type N
9. Recorder: No paper / paper, imported brand / brand china
10. Operational Panel: simulation screen / touch / industrial
11 computer screen. Electrical components: CHINT / Schneider / Siemens

Specifications Oven Type Pusher

Model	PTF-300 / 1.4.70	PTF -300 / 2.5.70	PTF -300 / 4.4.70	PTF -300 / 5.4.70
Muffle size × H (mm)	300 × 70	300 × 70	300 × 70	300 × 70
Number muffle	1	2	4	4
thermal zone	4	5	4 tapes 8 zones	5 tapes 10 zones
Thermal zone length (mm)	5000	7300	6000	7300
Maximum temperature (° C)	1150	1150	1150	1150
Uniformity temperature (° C)	± 5	± 5	± 5	± 5
Thermal power (kW)	90	180	200	260
Process gas ovens pushers	Ar / NAr / N2/ H2	Ar / NAr / N2/ H2	Ar / NAr / N2/ H2	Ar / NAr / N2/ H2
Total size L × W × H (mm)	10000 × 1400 × 1600	13500 × 1900 × 1600	12000 × 2200 × 2000	13600 × 2200 × 2000
Above specifications are defined according to the process of reducing tungsten powder. These specifications can be adjusted according to the requirements of the procedures are not standard acceptance, so the specific details will be set out in the proposals and technical agreements.