Description
El automatic oven is mainly used cemented for cementing tungsten powder, reduced metal powders, sintering copper alloy sintered tungsten and tungsten and molybdenum alloy pesado.
Technical characteristics
1. The furnace uses a thermal component molybdenum special design, which is characterized by high temperature and long life útil.
2. The intermittent type of loading and unloading ensures good sealing performance and lower gas consumption.
3. Cementation ovens are configured with fully automatic charger boat, push boat, unloading and boat service for disposal, which ensure stable quality and a smaller workforce.
4. The oven has operating functions to remote control, remote diagnostics and remote malfunction update functions programas.
Optional Automatic configuration Cementation Oven
1.Material refractory: brick alumina / aluminum silicate fiber / fiber felt cerámica.
2. Heating material: high temperature Molybdenum alloy doped La (lanthanum)
3. Muffle Material: Ceramic oxide aluminio
4. Process gas control: volume flow meter / mass, manual / automatic valve, imported brand / brand china
5. Operational Panel: simulation screen / touch / industrial
6 computer screen. PLC (Programmable Logic Control): OMRON / Siemens
7. Temperature controller: Shimaden / EUROTHERM
8. Thermocouple: Type C (coated tungsten / molybdenum coating / ceramic coating)
9. Recorder: No paper / paper, imported brand / brand china
10. Electrical components: CHINT / Schneider / Siemens
Specifications furnaces Cementation
| Specifications / Models | AMH-150 / 230-3 | AMH-300 / 160-3 | AMH-300 / 230-6 |
| Muffle size (W × H) (mm) | 150 × 230 | 300 × 160 | 300 × 230 |
| Thermal zone automatic oven Cemented | 3 | 3 | 6 |
| Length of thermal camera | 3200 | 3200 | 6400 |
| Maximum temperature (° C) | 1600 | 1600 | 1600 |
| Homogeneity of temperature (° C) | ± 5 | ± 5 | ± 5 |
| Thermal power (kW) | 120 | 150 | 360 |
| Process gas | NN2/ 3H2+ N2/ H2 | NN2/ 3H2+ N2/ H2 | NN2/ 3H2+ N2/ H2 |
| The above specifications are defined according to the carburization process tungsten powder. These specifications can be adjusted to the requirements of the processes are not standard acceptance, specific details will be established in the agreements and technical proposals. |
