Description
El sintering furnace deagglomerated MIM (metal injection mold) is mainly used for the sintering process deagglomerated stainless, ferrous steel, titanium and alloy steel and metal pieces of injection molds at high velocidad.
Technical characteristics
1. The vacuum oven has the special structure and design thermal zone heating element, thereby ensuring a good uniformity temperatura.
2. Special design muffle debonding is adopted with good sealing and a completely removable ligation, thus preventing internal contamination componentes.
3. The operation by touch screen and PLC (Programmable Logic Control) are used to make the operation simple and confiable.
4. The deagglomerated MIM sintering furnace has functions under vacuum, positive pressure less sintering, sintered partial pressure, lower pressure deagglomerated negative and positive pressure menor.
5 deagglomerated. The furnace adopts the structure and advanced refractories, which is characterized by a good insulating performance and a low thermal adsorption. That way you can save 20% energy compared with the previous design.
6. The oven has the fault alarm functions of temperature and pressure in excess interligación mechanical protection and automatic pressure, which forms a highly seguro.
7 oven. It features remote operation, remote diagnosis of malfunctions and remote update features remota.
Optional Configuration Vacuum Furnace
1. Oven door: Manual lock / automatic lock necklace bloqueo.
2. Furnace vessel: All carbon steel / stainless steel inner layer / stainless steel completo.
3. Thermal zone oven + soft carbon felt Felt hard compound / all felt hard compound.
4. Thermal Material: pressed / high pressure purity, density and strength graphite isostatic altas.
5. Muffle Material: Graphite fine size
6. Process gas control: volume and mass flow meter, manual / automatic valve, foreign brand / brand china
7. Vacuum pump and gauge: Foreign Brand / Mark china
8. Loading carriage: roller / montacargas
9 type type. Operating panel: simulation screen / touch / industrial
10 computer screen. PLC (Programmable Logic Control): OMRON / Siemens
11. Temperature controller: Shimaden / EUROTHERM
12. Thermocouple: Type C (coated tungsten / molybdenum coating / ceramic coating)
13. Recorder: No paper / paper, foreign brand / brand china
14. Electrical components: CHINT / Schneider / Siemens
Specifications Debinding MIM Sintering Furnace
| Specifications / Models | IMDS-030306 | IMDS-040408 | IMDS-040415 | IMDS-050520 |
| effective size of thermal zone A × A × L (mm) | 300 × 300 × 600 | 400 × 400 × 800 | 400 × 400 × 1500 | 500 × 500 × 2000 |
| Max. Weight (kg) (does not mean the actual weight of load) | 150 | 250 | 5 o'clock | 10:00 |
| Maximum temperature (° C) | 1550 | 1550 | 1550 | 1550 |
| Homogeneity temperature sintering furnace I deagglomerated MIM (° C) | ± 3 | ± 3 | ± 5 | ± 5 |
| Thermal power (kW) | 75 | 90 | 145 | 240 |
| Ultimate vacuum (Pa) | 1 | 1 | 1 | 1 |
| Rate of increase in pressure (Pa / h) | 0.67 | 0.67 | 0.67 | 0.67 |
| Gas debonding | Ar / NAr / N2 | Ar / NAr / N2 | Ar / NAr / N2 | Ar / NAr / N2 |
| The above parameters can be adjusted to the process requirements, are not standard acceptance, specific details will be set out in the proposals and technical agreements. |
